Plotter Blades for Vinyl Cutters, Carbide Blade

Vinyl Cutter Plotter Blades: Roland, Ioline, Graphtec, Gerber, Mimaki, Anagraph, Mutoh, Summa,

Allen Datagraph, GCC, Turbo Cut, Zeta, Ioline Cobra

These blades are made of Tungsten Carbide C2 under the specifications of the plotter's manufacturers. Each one of our blades passes through a strict Quality control before being packed in perfect conditions for its sale.

Tips for better blade performance:

• Keep protected the blade inside the package while you don’t use it.
• You must be careful handling of your blade; its hardness composition of Tungsten carbide makes it strong but very brittle.
• As a very fragile tool, you must prevent any fall or blow.
• Avoid touching the blade tip or edge with your fingers, since the perspiration of the hands can cause that the knife go rusty.
• Before start cutting any material, make a cutting test and adjust the force in your plotter to avoid a broken blade tip.
• Use the correct blade angle according the material that you want to cut.
• It is recommendable to use a different blade to cut each kind of materials.
• If the blade needs to be cleaned, you can use any low density lubricant to remove the rusting.
• You should check and/or replace the Teflon cutting strip of your plotter every 6-12 months to prevent ruts on it. These possible ruts affect the good cutting of the blades.