Flagro Heat Cannon Tent Heater, THC-85N OUT OF STOCK

Flagro Heat Cannon tent heater, natural gas, 85,000 btu, THC-85N
Manufacturer: Flagro
Manufacturer part number: THC-85N
$1,139.00

Out of Stock

 

Flagro Heat Cannon Natural Gas Propane Tent Heater, THC-85N

  • Model:   THC-85N
  • Input Minimum:  85,000 BTU/HR Natural Gas
  • Regulator: 7" WC- Inlet Pressure/ No Hose
  • Electrical:  115 Volt, 60 Hertz, Single Phase, 6.4/4.3 AMPS
  • Fan Motor:  1 HP
  • Air Circulation:  450 CFM
  • Weight:  122 lbs.
  • Dimensions: 30"L x 16"W x 22"H
  • Wheel Kit: Standard
  • Fuel Consumption:  Natural Gas  82 cu. ft/Hr.
  • Ignition:  Direct Spark Ignition Control
  • Thermostat Control with 20' cord for remote location
  • 2nd Stage Natural Gas Regulator included
    • Potted controls are standard equipment.  The flame control (the real brains in the heater) is a sealed component.  This keeps the moisture out of one of the most expensive parts in the heater and one that can fail if it is exposed to too much moisture.
    • Strategically positioned lifting handles.  Picking the Heat Cannon up for placement in a truck is a snap.  Extra sturdy handles are ergonomically placed for easy and safe lifting.
    • Heavy-duty front stabilizing leg.  Rugged to withstand rental duty usage, in and out of truck during set up.
    • Thermostat is in a steel case with 20' of cord for remote placement.
    • Heavy-duty, large, 10" semi-pneumatic wheels have a "give" to them, they are not hard, and so they rollover stones and small impediments with ease.
    • Heavy 16 gauge housing and undercarriage compared to 20 gauge.  Heat Cannon heaters stand up to rental duty, time and time again.

Out of Stock

 

Flagro Heat Cannon Natural Gas Propane Tent Heater, THC-85N

  • Model:   THC-85N
  • Input Minimum:  85,000 BTU/HR Natural Gas
  • Regulator: 7" WC- Inlet Pressure/ No Hose
  • Electrical:  115 Volt, 60 Hertz, Single Phase, 6.4/4.3 AMPS
  • Fan Motor:  1 HP
  • Air Circulation:  450 CFM
  • Weight:  122 lbs.
  • Dimensions: 30"L x 16"W x 22"H
  • Wheel Kit: Standard
  • Fuel Consumption:  Natural Gas  82 cu. ft/Hr.
  • Ignition:  Direct Spark Ignition Control
  • Thermostat Control with 20' cord for remote location
  • 2nd Stage Natural Gas Regulator included
    • Potted controls are standard equipment.  The flame control (the real brains in the heater) is a sealed component.  This keeps the moisture out of one of the most expensive parts in the heater and one that can fail if it is exposed to too much moisture.
    • Strategically positioned lifting handles.  Picking the Heat Cannon up for placement in a truck is a snap.  Extra sturdy handles are ergonomically placed for easy and safe lifting.
    • Heavy-duty front stabilizing leg.  Rugged to withstand rental duty usage, in and out of truck during set up.
    • Thermostat is in a steel case with 20' of cord for remote placement.
    • Heavy-duty, large, 10" semi-pneumatic wheels have a "give" to them, they are not hard, and so they rollover stones and small impediments with ease.
    • Heavy 16 gauge housing and undercarriage compared to 20 gauge.  Heat Cannon heaters stand up to rental duty, time and time again.
Product tags